Why wait?
Save up to
80% ON ENERGY today!
The most sustainable and efficient way to heat and cool your home
TAKE THE FIRST STEP TODAY
Build the sustainable and energy-efficient home your family deserves.
Free Quote
Upgrade your boiler and start
Eco-friendly
- Ecoforest heat pumps use renewable energy, significantly reducing CO₂ emissions—good for both you and the environment.
- Zero noise, zero emissions.
Lower bills
- Ecoforest heat pumps lower energy consumption by up to 80%, delivering five times the efficiency of conventional systems.
- Save up to 60% on your energy bills.
Easy installation
- Ecoforest heat pumps are compact and easy to install.
- They are installed outside your home, and require no structural work.
- In less than a day, you can start enjoying Ecoforest comfort.
Year-round comfort
- Enjoy heating in winter, cooling in summer and hot water all year round.
- Keep your home at the perfect temperature at all times.
Save more with air-source systems
You only pay for electricity consumption. For every 1 kW used, you get 5 kW for free—helping you reduce your energy bill by up to 80%.
Ecoforest air-source heating and cooling is 25% cheaper than gas and 50% cheaper than oil.
It is also a more cost-effective alternative to propane and other fossil fuel systems.
It is already the energy solution for most office buildings, airports, cinemas, clinics…
Renewable energy is here to stay, offering benefits for both the planet and your wallet.
INVERTER Technology
DIRECT connection to each service ensures the lowest possible flow temperatures, maximum efficiency, and reduced installation costs.
9 out of 10 customers never go back to their old air conditioning system.
What do I need to install an Ecoforest heat pump?
Emitters
- Radiators provide heating.
- Fan coils are used for both cooling and heating.
- Underfloor or ceiling heating systems are also compatible with the Ecoforest system.
Ducts
- Distribute hot or cold air to the emitters.
DHW Tank
- Provides domestic hot water for your home.
Outdoor Unit
- An air-to-water heat pump that extracts energy from the outside air and converts it into heating, cooling, or DHW.
Installation takes just 1 day, or up to 3 days for larger homes or extensive areas, allowing you to enjoy full climate control in your home while saving energy and money month after month.
You can also use air-source heating with:
- Fan coil
- Underfloor heating
- Radiant ceiling panels
Ecoforest AIR-SOURCE HEAT PUMPS
WE STILL HAVEN’T FOUND A WAY TO MULTIPLY ENERGY,
80% free energy from the air – 20% electricity consumption.
Ecoforest AIR-SOURCE HEAT PUMPS
WE STILL HAVEN’T FOUND A WAY TO MULTIPLY ENERGY,
But we have learned how to extract it efficiently and sustainably for the planet:
80% free energy from the air – 20% electricity consumption.
And all of this with just a single outdoor unit.
- Power ranges: 1-7 kW, 1-9 kW, 3-12 kW, 3-18 kW, 4-20 kW (up to 20 kW in a single unit, suitable for buildings, commercial premises, and large homes).
- Heating, cooling, and domestic hot water production up to 70ºC without the need for an electric resistance.
- Fan with the quietest operation on the market.
- Monobloc unit with a 100% hydraulic installation.
- Single-phase (230V) and three-phase (400V) power supply.
- Operates in extreme temperatures as low as -20ºC.
- Uses natural refrigerant R290, an ideal replacement for gas and oil boilers.
- Full home control via the internet with ecoSMART easynet, even when you're away.
- Variable fan speed control.
- Special protections for operation in the most extreme conditions.
- DDC (Dynamic Defrost Cycle) system reduces defrosting time, significantly increasing average power output throughout the year.
- Modular construction: air-source unit installed outside, with an optional hydrokit for indoor installation.
Control your home's climate from anywhere.
Ecoforest is a technological leader in the HVAC sector, offering solutions based solely on clean and natural energy.
Frequently Asked Questions from Our Customers
The payback period for the Ecoforest system depends on your consumption levels and the alternative system you are comparing it to. In any case, the Ecoforest heat pump system is the most efficient option, as it collects at least three-quarters of the energy it uses from the air. In other words, for every unit of energy you pay for, you get 4 units of energy in return.
In short, we could say that in the worst-case scenario, the payback period will be less than half the system’s lifespan.
Absolutely. The Ecoforest air-to-water system requires very little space. You only need a small outdoor area (such as a façade, terrace, balcony, drying area, roof, or patio) to install the heat pump. An official Ecoforest installer will assess the space to ensure it meets the necessary requirements and will determine the most suitable installation approach for your specific situation.
Energy savings are the same whether you’re in a flat or a detached house: you get at least 80% of the energy you consume for free from the air. Only the remaining 20% is electrical energy. Enjoy maximum comfort and savings all year round.
Yes. Air-source energy is a method of heat generation. The distribution of this heat can be done with any type of emitter, such as radiators or underfloor heating.
Ecoforest air-source heat pumps can last for over 25 years. This long lifespan makes it an attractive and sustainable option for both heating and cooling your home.
In addition to the financial and energy savings, Ecoforest air-source systems are 100% safe.
- There is no risk of leaks or explosions.
- No combustion is involved (no conventional boiler).
- They do not produce fumes or waste.
Yes. In terms of consumption, safety, and environmental responsibility, air-source systems are increasingly replacing conventional boilers for both heating and domestic hot water (DHW).
You can reuse the emitters and ducts from your old installation, as long as the official Ecoforest installer confirms their suitability.
The answer depends on the size of the hot water tank, the duration of each shower, the temperature of the tank, and the temperature at which users are showering.
To give you an estimated answer, a 10-minute shower at 40°C would typically use around 50 litres of hot water.
As air-source heat pumps, Ecoforest air-source systems require minimal maintenance, as they don’t involve combustion or waste. The only maintenance required is the mandatory on-site inspection, in line with current regulations.
It is not compulsory; it depends on the characteristics of your home and your specific consumption needs. The official installer will always advise you on the suitability of your installation.
Ecoforest air-source heat pumps allows you to multiply the energy drawn from the mains by up to five times and transfer it into your home, thanks to the physical properties of the refrigerant gas. This means that for every kW of electricity consumed, it can generate up to 5 kW of heat for your home and hot water, or cooling in the summer.
In the case of gas, the response is a one-to-one ratio for every unit consumed.
TAKE THE FIRST STEP NOW
Ecoforest is the market leader in renewable biomass heating, offering the widest range of pellet stoves and boilers at the best prices.
In 2012, Ecoforest became the first Spanish manufacturer of ground-source heat pumps and the first European manufacturer to incorporate inverter and cycle inversion technology.
In 2020, Ecoforest launched the first ground-source heat pump with a natural refrigerant suitable for indoor installation.
In 2021, Ecoforest introduced the widest range of air-source heat pumps using R290 natural refrigerant.
In 2023, Ecoforest expanded its range of ground-source systems with R290 natural refrigerant up to 48 kW, becoming a pioneer in this sector.
Are you an installer?
Visit the specialised page for you.
